Voltage Converters

Converts 240V to 120V for using US appliances on Australian mains voltages. Fitted with US mains socket.

This 12VDC 8A pulse width modulator (PWM) is a general purpose DC output power control.

M8185 250W model. Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket. Secondary rating: 120V 2.1A Max

M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket. Secondary Rating: 120V 4.2A

Converts 220V-240V to 110V for using US appliances on Australian mains voltages. Fitted with US mains socket.

A boost module allowing a low input voltage to be increased to a higher output voltage. Display can be toggled between input and output voltages. Input 3-34V DC. Output 4-35V DC. 2A continuous current. Size: 66L x 34W x 14Hmm.

Utilises the LM2596S and LM2577 to accept a 3.5-28V input and output 1.25-26V (adjustable) at a max current of 1A. Includes brass standoffs. Ideal for small projects where regulated power is required. Size:󈍕L x 38W x 21Hmm.

Compact, self-contained LM2596 DC-DC module for generating a lower, regulated DC voltage output from a higher voltage supply. Much higher efficiency and lower heat dissipation than traditional linear regulator designs. 3-40V DC input. 1.5-35V output. 3A max.

A converter module allowing a low input voltage to be increased to a higher output voltage. Input 3.5-35V DC. Output 5-52V DC. Ideal for powering higher voltage devices from a typical 5V microcontroller platform. 3A continuous current. Size:󈍌L x 38W x 14Hmm.

A converter module allowing a low input voltage to be increased to a higher output voltage. Input 3.8-32V DC. Output 1.25-35V DC. Ideal for powering higher voltage devices from a typical 5V microcontroller platform. 3A continuous current.

This converter provides a regulated 12V d.c. output at a maximum of 30A from a typical 24V battery. Dimensions: 110x70x23mm

An ever-increasing amount of electronic and electrical equipment are being installed in vehicles and boats. Because most low-voltage equipment, such as navigational aids, radio equipment, phones and car hi-fi systems are designed for 12 Volts and are not suitable for connection to a 24V battery system.

Accepts an input voltage of 1-5VDC and outputs 5V DC 600mA via USB. Ideal for powering projects from batteries such as a single 3.6V lithium cell. Very small module, easy to build into any design. 34L x 16Wmm.

This handy DC-DC converter accepts a 8-32V DC input voltage and converts it to a 5V 3A micro USB output for charging a USB device. These can be easily integrated into vehicle wiring, remote power systems and more.

This handy DC-DC converter accepts a 8-32V DC input voltage and converts it to a 5V 5A type A USB socket output for charging a USB device. These can be easily integrated into vehicle wiring, remote power systems and more.

This handy DC-DC converter accepts a 8-32V DC input voltage and converts it to a 5V 5A type C USB socket output for charging a USB device. These can be easily integrated into vehicle wiring, remote power systems and more.