PowerShield
Australian company PowerShield specialises in developing and providing high quality, localised power protection solutions to the Oceania market. For over 20 years PowerShield has been researching and developing Uninterruptible Power Supply (UPS) and power filtration products that meet challenging Australian conditions and has been solving the power problems for thousands of businesses since it’s inception.
Dangerous
PCMin 12V DC 18W NBN Uninterruptible Power Supply
D0875
This compact plugpack style NBN UPS is fitted with an internal lithium-ion battery pack for keeping devices powered up during a power outage. Appliances may then be shutdown safely, protecting from data loss, corruption or damage. 12V DC output with 8 DC jack tips to suit a wide range of appliances. Ideal size for small phone systems, POS, tills, r
Powershield Replacement Battery Cartridge To Suit D0911 (PSBC4)
D0930
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only!
PSAS400D UPS Relay Card With D Connector
DB0891
The relay card (PSAS400) provides volt free contact (VFS) relays that change state upon UPS events. This type of card is often used when current loop communications are required for devices such as building management systems (BMS), access control alarm panels or industrial PLCs. User selectable normally open (default) or normally closed contacts.
PSAS400T UPS Relay Card With Screw Terminals
DC0891
The PSAS400 communication card provides contact closures for remote monitoring of your UPS. To meet different application requirements the PSAS400 card is capable of selecting the status of the dry-contact signal (active close or active open) by setting jumper.
PSCEBB12 Extended Battery Module for PSCE2000/3000 Centurion UPS
D0907
Add run time to your PowerShield Centurion UPS system with the PSCEBB12. Extends the standard run time at 50% load from 26 minutes to 104 minutes.
PSCEBB18CH Battery Module & Charger for PSCE2000/3000 Centurion UPS
D0908
Add run time to your PowerShield Centurion UPS system with the PSCEBB18CH. Extends the standard run time for PSCE2000 at 50% load from 26 minutes to 220 minutes.
Dangerous
PSCEBB6 Extended Battery Module for PSCE1000 Centurion UPS
D0905
Add run time to your PowerShield Centurion UPS system with the PSCEBB6. Extends the standard run time at 50% load from 26 minutes to 104 minutes.
PSCEBB60CH Battery Module & Charger for PSCE6000/10K Centurion UPS
D0909
Add run time to your PowerShield Centurion UPS system with the PSCEBB60CH. Extends the standard run time for PSCE6000 at 50% load from 28 minutes to 232 minutes.
PSCSSNMP Cyber Secure Comms Card To PowerShield UPS
DS0891
The Cyber-Secure SNMP follows the Australian Cyber Security Centre (ACSC) Information Security Manual (ISM) framework for risk management and cyber threats to protect information and systems from external threats. The Cyber Secure Web card follows industry standards for the user interface and offers complex emergency procedures to be enacted simply
PSD1200 UPS 1200VA Defender
D0882A
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally,
PSD1600 UPS 1600VA Defender
D0883
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally,
PSD2000 UPS 2000VA Defender
D0886
The Powershield Defender AVR 2000VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC's and point of sale systems.
PSD650 UPS 650VA Defender
D0881
The Powershield Defender PSD 650VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC''s and point of sale systems.
New
RoHS
PSDR1500 UPS 1500VA Defender Rack Mount
D0889
The Defender Rackmount 1500VA UPS expands the successful Defender Range by building the popular features into a Rack Mount style. At 300mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets.
PSDR800 UPS 800VA Defender Rack Mount
D0884
This UPS 800VA Defender Rack Mount expands the successful Defender Range by building the popular features into a Rack Mount UPS. At 230mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets. This versatile UPS uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage, protecting your valu
PSEMD Environmental Monitoring Device For UPS Systems
D0918
The PowerShield Environmental Monitoring Device (PSEMD) is a PSSNMPV4 accessory suited for monitoring temperature and humidity. Email alerts and or system shutdown can be initiated if the user defined thresholds are exceeded. It offers two additional dry contact inputs for sensors such as smoke detectors and tamper switches.
PSG1000 UPS 1000VA Safeguard
D0874
The Powershield SafeGuard 1000VA Uninterruptible Power Supply (UPS) is designed for a home/office solution.
PSG750 UPS 750VA Safeguard
D0873
The Office model is perfect for a home/office solution. It includes three battery backup and surge protected Australian sockets, three dedicated Australian outlets with surge protection and RJ45 phone line surge protection. Provides modified sinew
PSLN600 Ninja Slimline LifePO4 600VA UPS
D0863
Designed for Australian conditions the Ninja Slimline UPS features Lithium Iron-Phosphate (LiFePO4) battery technology to allow the UPS to operate continuously at up to 40 degrees celcius without reduction in battery life. At 42mm in height, the Ninja Slimline is the perfect UPS for compact spaces.
PSMBS2K UPS Maintenance Bypass Switch 2kVA
D0919
Power Shield are pleased to be able to offer a comprehensive range of MBS (Maintenance Bypass Switches) suitable for all UPS applications. An inclusion of a MBS is recommended for all critical power applications.
PSMBS3K UPS Maintenance Bypass Switch 3kVA
D0920
Power Shield are pleased to be able to offer a comprehensive range of MBS (Maintenance Bypass Switches) suitable for all UPS applications. An inclusion of a MBS is recommended for all critical power applications.
PSMBSR10K UPS Maintenance Bypass Switch 10kVA
D0922
Mechanical safety microswitch with static bypass activation is standard. This eliminates the possibility of incorrect switching sequences and hence possible damage to the UPS and injury to personnel. 10kVA
PSMBSW10K UPS Maintenance Bypass Switch 10kVA
D0922A
The PSMBSW10K is used as an external maintenance bypass switch module to provide uninterrupted power to the connected loads during UPS scheduled maintenance, battery replacement and or UPS replacement. It is suited for use with the 6kVA or 10kVA UPS.
PSRTBB12 Battery Bank for Centurion/Commander UPS
D0916
Extended run time battery bank for Centurion/Commander UPS systems. Fitted with 12 x 9Ah batteries. Battery banks add significant run time to a UPS system allowing equipment to maintain operation for longer periods. For calculating run time consult the PowerShield calculator online. Special order only, typically 3-5 day lead time.
PSRTBB6 Battery Bank for Centurion/Commander UPS
D0914
Extended run time battery bank for Centurion/Commander UPS systems. Fitted with 6 x 9Ah batteries. Battery banks add significant run time to a UPS system allowing equipment to maintain operation for longer periods. For calculating run time consult the PowerShield calculator online. Special order only, typically 3-5 day lead time.
