Kingray

This simple TV signal amplifier is ideal for areas where reception is slightly weak. Provides up to 20dB of gain to boost to the signal for improved reception. Includes 2 PAL female to F type male adaptors.

14V DC 150mA plugpack with F-Type socket arrangement designed to plug in line with Kingray range of masthead amplifiers.

14V DC 150mA plugpack with PAL type socket arrangement designed to plug in line with Kingray range of masthead amplifiers.

17.5V AC 100mA plugpack with F type socket arrangement designed to plug in line with Kingray range of masthead amplifiers.

17.5V ac 100mA plugpack with PAL socket and plug arrangement designed to plug in line with Kingray range of masthead amplifiers.

These amplifiers are ideal for use at home where you want to operate more than one TV. Installation is simple. Run a single cable from each outlet back to the amplifier. Boosts antenna signal by approximately 10-12dB which ensures a strong signal for impr

Housed in a zinc diecast enclosure to prevent external interference. Suits frequencies from 5 to 2400MHz for use with digital TV, cable and satellite TV. All models include power pass feature from input to all outputs to allow powering of a masthead amp. F type connection.

Housed in a zinc diecast enclosure to prevent external interference from unwanted signals. Unlike cheaper splitters, these are wideband and will accept frequencies up to 2400MHz making them suitable for use with Digital TV, Cable and Satellite TV frequency

Housed in a zinc diecast enclosure to prevent external interference. Suits frequencies from 5 to 2400MHz for use with digital TV, cable and satellite TV. All models include power pass feature from input to all outputs to allow powering of a masthead amp. F type connection. This splitter is also Foxtel approved.

Housed in a zinc diecast enclosure to prevent external interference from unwanted signals. Unlike cheaper splitters, these are wideband and will accept frequencies up to 2400MHz making them suitable for use with Digital TV, Cable and Satellite TV frequencies. Fitted with industry standard F connectors for easy installations.

These amplifiers are ideal for use at home where you want to operate more than one TV. Installation is simple. Run a single cable from each outlet back to the amplifier. Boosts antenna signal by approximately 10-12dB which ensures a strong signal for im

Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future.

As the name suggests, this amplifier is mounted on the antenna mast (as close to the antenna as possible) to avoid any signal loss from the connecting cable. It has inputs for a separate VHF or UHF antenna or a combined input for both. Signal balance is a

PSK18M. Kingray’s power supplies have constantly maintained their reputation as the highest quality and most reliable power supplies to the antenna industry. They feature posistor protection circuitry and fully comply with Australian and New Zealand Energy Standards.

18V DC 1A plugpack with 2.5mm DC socket arrangement designed to plug in line with Kingray range of MATV distribution amplifiers.