50k 5mm Top Adjust Trimpot

Specifications

Nominal Resistance: 100 O to 1M O

• Std. Res. Tolerance: + /- 30%
• Residual Tolerance:
• Maximum 5% of Nominal Resistance but less than 30Ω , whichever is lower
• Taper: Linear (B)
• Power Rating: 0.1W
• Operating Temperature: less than 50V
• Rotational Life: Maximum +/-15% change in Nominal Resistance after 100 Cycles Unloaded
• Load Life: Maximum +/-5% change in Nominal Resistance after 3 hours loaded.
• Rotational Angle: 200°± 20°
• Torque: 60 ~ 300g.cm
• End-Stop Strength: 500g.cm minimum
• Mechanical Strength: Bakelite sheet not be be broken down under pressure of 1Kg. cm maximum
• Operating Temperature: -5°C ~ +40°C
• Temp. Characteristics: +5 ~ -30% change in resistance after 5 hours at 70°C
• Humidity Characteristics:
• Maximum 20% Change in Resistance after 350 hours at 40°C and RH 90% loaded
• Soldering Method: Hand Soldering
• Soldering Temperature: 250°C
• Soldering Time: 2 seconds