Cop Security

Founded in 1992, COP Security System Corp. specializes in the design, development, and manufacturing of high-quality surveillance and networking products. They are committed to delivering comprehensive, total-solution packages that meet the evolving needs of the security industry. Their mission is to be a global leader in system integration, providing reliable security monitoring equipment and robust networking solutions you can trust.

View as Grid List
Sort by
Display per page
A black 2m, 2.1mm DC Lead consisting of 2 sockets to 2 plugs.

0.2m 2.1mm DC Socket to Dual DC Plug Cable

P6715
A black 2m, 2.1mm DC Lead consisting of 2 sockets to 2 plugs.
This adaptor will convert 17-28V AC or 18-32V DC to a regulated 12V DC 2A output suitable for security cameras.
New
RoHS

24VAC/DC to 12VDC Converter Cable

S9750A
This adaptor will convert 17-28V AC or 18-32V DC to a regulated 12V DC 2A output suitable for security cameras.
This 4 way video sender transmits video signals over long distances. It replaces the  need to use expensive coaxial cable by using one Cat 5 UTP cable instead of 4 individual coaxial cables. It can transmit four channels of video up to 600m (B+W) or 300m

4 Way Video Sender

S9252A
This 4 way video sender transmits video signals over long distances. It replaces the need to use expensive coaxial cable by using one Cat 5 UTP cable instead of 4 individual coaxial cables. It can transmit four channels of video up to 600m (B+W) or 300m
Distributes a single power input to eight outputs. Perfect for splitting a single camera supply to power up to eight cameras.

8 Way Terminal Block Bus Bar

S9755
Distributes a single power input to eight outputs. Perfect for splitting a single camera supply to power up to eight cameras.
This illuminator can be used in any night application where insufficient light levels need to be boosted. It features very high power infra red LEDs providing up to 80m coverage. Housed in a rugged sealed aluminium case to withstand the elements.

80m IP66 Infrared Illuminator

S9143A
This illuminator can be used in any night application where insufficient light levels need to be boosted. It features very high power infra red LEDs providing up to 80m coverage. Housed in a rugged sealed aluminium case to withstand the elements.
Distributes a single power input to nine outputs. With in-built PTC fuses on each output for short circuit protection.

9 Way Terminal Block Bus Bar

S9757
Distributes a single power input to nine outputs. With in-built PTC fuses on each output for short circuit protection.
Allows the mounting of a C/CS lens equipped camera onto a telescope.

C/CS Telescope Adapter Ring

S9789
Allows the mounting of a C/CS lens equipped camera onto a telescope.
Enables audio to be added to any camera installation. Plugs inline  via the video output and dc power lead. 
A simple, low cost solution for existing installations where audio is required. 700mm length.

Camera Inline Microphone Cable

S9701
Enables audio to be added to any camera installation. Plugs inline via the video output and dc power lead. A simple, low cost solution for existing installations where audio is required. 700mm length.
These PoE transceiver units allow ethernet and power to be sent along coaxial cabling.

Ethernet Over Coaxial Master Transceiver

S9270
These PoE transceiver units allow ethernet and power to be sent along coaxial cabling.
5dB omni antenna to suit 2.4GHz cameras and equipment.
Standard SMA connection.

Omni 5Db SMA 2.4Ghz Wireless Antenna White

S9722A
5dB omni antenna to suit 2.4GHz cameras and equipment. Standard SMA connection.
These camera brackets allow the mounting of a CCD camera to a wall. The S 9066 small bracket may be used with the included extension post to extend the mounting height to 110mm.

Small Aluminium CCTV Bracket

S9066
These camera brackets allow the mounting of a CCD camera to a wall. The S 9066 small bracket may be used with the included extension post to extend the mounting height to 110mm.
Allows long distance transmission of power, mono audio and AHD 1080p video signals for use in CCTV installations. Connection via RJ45. 

No power required to operate.

Wallplate Power / Audio / Video over UTP Cat5 Pair

S9256
Allows long distance transmission of power, mono audio and AHD 1080p video signals for use in CCTV installations. Connection via RJ45. No power required to operate.