40W 4 Input 100V Public Address Amplifier

NOW EQUIPPED WITH 4 XLR MIC & 4 RCA LINE INPUTS Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W, 60W and 100W RMS respectively. Frequency response extends from 60Hz to
SKU: A4036
$50.00

All Prices Shown are (ex GST)


i h
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

NOW EQUIPPED WITH 4 XLR MIC & 4 RCA LINE INPUTS

Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W, 60W and 100W RMS respectively.

Frequency response extends from 60Hz to 15kHz at a total harmonic distortion (THD) of less than 0.5%. Features include, VOX muting, four balanced line microphone inputs, four stereo line input sockets, and separate bass and treble controls enabling a diversity of installation applications, including schools, public halls, workshops and sporting complexes.

VOX muting is in-built and can be activated on inputs 1 & 2 as required via the internal jumpers. Once activated input 1 will override all other inputs, including the alert/evac input. Input 2 will override inputs 3 & 4.

Powered from 240VAC mains or 24VDC permitting battery backup operation during mains power failure. Output is 100V/70V line or low impedance (4 - 16 Ohm) speaker loads. Note: 70V line is unavailable on the A 4036 40W amplifier.

All units feature thermal overload shutdown to protect the amplifier if a speaker fault condition develops.

Master volume can be controlled remotely via a figure 8 cable and a A 2280A wall control unit or 1K potentiometer (part no. R 2202).

Features:

  • Desk or 19" rack mountable
  • Low noise and distortion levels
  • 4 balanced microphone inputs
  • 4 stereo to mono auxiliary inputs
  • Internally selectable phantom power
  • Optional tone generator board (A 2073)
  • Selectable VOX muting on inputs 1 & 2
  • Optional remote volume adjustment
  • Bass and treble tone controls
  • Output for 70V*, 100V line and 4 - 16 Ohm loads
  • 240V AC or 24V DC operation
  • Thermal overload shutdown protection
  • 10 year warranty
  • Australian Made
  • *70V line unavailable on A 4036 40W model

Specifications

?Power Output

  • A 4036: 40 watts RMS
  • A 4041: 60 watts RMS
  • A 4046: 100 watts RMS
  • Distortion: < 0.5% @ 1kHz

Signal to Noise Ratio

  • Typically 75dB below rated output. All inputs.

Frequency Response

  • Mic inputs: 50Hz - 10kHz, -3dB
  • Line inputs: 60Hz - 15kHz, -3dB
  • Output line: 70V*, 100V or 4 - 16O (Note. 70V unavailable on A 4036)

Input Sensitivity

  • Mic inputs: 1.5mV balanced
  • Line inputs: 400mV

Output Connectors

  • Speakers:Screw terminals

Input Connectors

  • Mic 1-4: 3 pin XLR balanced
  • Line inputs 1-4: RCA stereo socket
  • 24V DC power: Screw terminals
  • 240V AC power: IEC power connector
  • Muting: VOX on inputs 1 & 2, 60dB below rated output
  • Remote volume: Screw terminals

Controls

  • Mic inputs: Volume
  • Line inputs: Volume
  • Bass: